+86-551-68661901
Huis / Nieuws / Inhoud

May 31, 2021

Hoe de thermistor wordt gedetecteerd

When testing, use the ohm gear of the multimeter (depending on the nominal resistance value to determine the gear, generally R1 gear), which can be operated in two steps: first, test at normal temperature (indoor temperature is close to 25 degree ), use alligator clips instead of test pens to clip them separately. Measure the actual resistance value of the two pins of the PTC thermistor, and compare it with the nominal resistance value. If the difference between the two is within ±2Ω, it is normal. If the actual resistance value is too different from the nominal resistance value, it means that its performance is poor or damaged. Secondly, heating test, on the basis of normal temperature test, the second step test - heating test can be carried out, a heat source (such as an electric soldering iron) is heated close to the thermistor, and the multi-function indicator is observed. It is seen that the multi-function indicator changes with the increase of temperature, which indicates that the resistance value is gradually changing (the NTC resistance value of the negative temperature coefficient thermistor will become smaller, and the PTC resistance value of the positive temperature coefficient thermistor will become larger) , When the resistance value changes to a certain value, the displayed data will gradually stabilize, indicating that the thermistor is normal. If the resistance value does not change, it indicates that its performance has deteriorated and cannot be used continuously.

Tijdens de test moeten de volgende punten in acht worden genomen: (1) Rt wordt door de fabrikant gemeten wanneer de omgevingstemperatuur 25 graden is, dus wanneer Rt wordt gemeten met een multimeter, moet deze ook worden uitgevoerd wanneer de omgevingstemperatuur dicht bij 25 graden ligt. de toetsbaarheid te garanderen. betrouwbaarheid. (2) Het meetvermogen mag de gespecificeerde waarde niet overschrijden om meetfouten veroorzaakt door het thermische effect van de stroom te voorkomen. (3) Let op de juiste werking. Knijp tijdens het testen niet in de thermistorbehuizing met uw handen om te voorkomen dat de lichaamstemperatuur de test beïnvloedt. (4) Zorg ervoor dat de warmtebron en de PTC-thermistor niet te dicht bij elkaar komen of rechtstreeks in contact komen met de thermistor om verbranding te voorkomen.


Bericht versturen